CouplerTec (2024)

Snow, freezing rain and sleet have paralyzed a large part of Slovenia. It also paralyzed vehicles. “How to get very thick ice off a car?” is now the question.

It’s quite simple, if you can get into the car. Start the engine and turn on the heating and defrosting system. Set it on highest heat and low speed. Once the defroster starts to melt the ice you should be able to at least slide a big chunk of the ice off the car.
This low setting is extremely important. You don’t want to crack the windshield by heating it too quickly. It’s also very important that you turn on the engine when starting the heating system. Otherwise you’ll wait for hours and ice melting will just not happen. ;)

If you need to make doors to open first, than there are options of applying a de-icing solution, using a spray bottle. Home remedies include the following mixtures: 50 percent water and 50 percent ethyl alcohol, or 50 percent water and 50 percent vinegar. Never use hot water or the windshield might crack.

However we were surprised by the suggestion of using mixture salt and water. It is a very well known fact that salt is extreme rust accelerator, so we would recommend this method only to those with CouplerTec installed.

CouplerTec (1)
Photo: Danilo Rozman (http://on.fb.me/1lAHdbM)

Source: http://dobranovica.si/kako-odstraniti-led-z-avtomobila/, http://www.ehow.com/how_10756_remove-ice-windshield.html, http://answers.yahoo.com/question/index?qid=20110203083650AARzi5u, http://chemistry.about.com/b/2014/01/29/how-can-you-de-ice-your-windshield.htm

Posted in blog

CouplerTec (2024)

FAQs

CouplerTec? ›

Yes – Even in severe cases, CouplerTec systems have been proven to slow the corrosion process.

Does CouplerTec work? ›

Yes – Even in severe cases, CouplerTec systems have been proven to slow the corrosion process.

Does electronic rust protection work? ›

Experts pursuing automotive careers do not believe there is substantial evidence regarding the efficiency of an electronic rustproofing system, or that it works better than other options like waxes. The technology itself is based on the models used on the bottom of boats.

What is the best rust protection for cars? ›

Best Rust Converters And Inhibitors
  • FDC Rust Converter Ultra: Best Brush-On Rust Converter.
  • Rust-Oleum Rust Reformer Spray: Best Affordable Rust Remover.
  • POR-15 Rust Preventive Coating: Best Brush-On Rust Preventative.
  • Corroseal Water-Based Rust Converter: Best Overall.
Jan 5, 2024

How much does electronic rust proofing cost? ›

For chemical rust proofing, it typically costs around 600 – 900 $. On the other hand, electronic rustproofing is more expensive that ranges from 1000 – 1900 $ depending on the system, electronic rustproofing pad, and warranty it offers.

Is permanent rust proofing worth it? ›

Although rust proofing is not mandatory, it might be worth it, especially if you frequently drive during the winter. Snowy conditions, especially when mixed with salt, can increase the odds of rusting in your car.

What is the best rust proofing for bolts? ›

Zinc flake coatings – such as Delta Protekt® or Delta-Tone® – are currently the most popular protection for steel bolts and washers.

Does WD-40 protect from rust? ›

For metal surface areas that may be susceptible to rust, try WD-40 Specialist Gel Lube. It protects against rust and surface corrosion up to 6X longer than the competition* on horizontal, vertical, and inverted surfaces with a thick, no-drip formula.

Does electronic rust protection drain a battery? ›

Will the Final Coat electromagnetic corrosion module drain my car battery? The module does not drain your vehicle battery.

What do car manufacturers use to prevent rust? ›

Below are some of the most common methods and technologies that car manufacturers use to protect cars from corrosion: Galvanization. Most modern car bodies are galvanized, meaning they're dipped into molten zinc, which adds an additional layer that's even harder than steel.

Can you Ziebart over rust? ›

Designed to work with the rust already on your vehicle, Ziebart Rust Eliminator reacts with the existing rust to transform it into a protective, rust-inhibiting film. This is done with a patented chemical formula designed to halt corrosion and transform affected areas into a buffer from further damage.

What brand of cars rust the most? ›

Cars Most Susceptible to Rust Damage
  • Ford Fiesta.
  • Vauxhall Corsa.
  • Land Rover Range Rover Sport.
  • Ford StreetKa.
  • Toyota Rav-4.
  • Jeep Wrangler.
  • Volkswagen Polo Hatch.
  • MINI Hatchback.
Nov 19, 2021

Are electronic rust modules worth it? ›

Electronic protection shouldn't be necessary and I wouldn't recommend it." Instead of pricey dealer rustproofing gadgets or sprays for new vehicles, spring for mud flaps to protect from damage from rocks and make sure all chips or scratches in the paint are fixed quickly, McDermid says.

Will rust proofing stop existing rust? ›

Our rustproofing product can not remove existing rust, but it may slow its progression and prevent new rust from forming.

How much does permanent rust proofing cost? ›

How much does rustproofing your car cost? Prices are usually governed by the size of the vehicle. Cars will cost between $120 to $150 to rustproof. If you are rustproofing a minivan or SUV, the costs will range between $130 and upwards to $170.

Does oil rust proofing work? ›

Oil undercoating, unlike traditional rubberized, paint or wax undercoating, penetrates through rust down to the good metal, displacing moisture and eliminating oxygen, take either out of the equation and oxidation cannot occur.

Are electronic module effective for rust? ›

Rustproofing Myth: Electronic Rust Modules Are Ineffective

You'll be glad to know that they actually do work and can help to protect your vehicle from rust.

Does rust inhibitor spray work? ›

I use it faithfully on all my new tools and a shovel. That is five years old looks as if I just purchased it, I've even treated my older tools after I've cleaned them from rust and they've looked brand new. This is a must for people that care about keeping their equipment in tiptop shape. It's worth every penny.

Does blaster surface shield stop rust? ›

B'laster Surface Shield® is the longest lasting, Rust Protectant on the market. This unique formula is easy to apply and provides complete corrosion protection for all metal surfaces, equipment and moving parts. It's the best defense in fighting rust.

Top Articles
Latest Posts
Article information

Author: Wyatt Volkman LLD

Last Updated:

Views: 6309

Rating: 4.6 / 5 (46 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Wyatt Volkman LLD

Birthday: 1992-02-16

Address: Suite 851 78549 Lubowitz Well, Wardside, TX 98080-8615

Phone: +67618977178100

Job: Manufacturing Director

Hobby: Running, Mountaineering, Inline skating, Writing, Baton twirling, Computer programming, Stone skipping

Introduction: My name is Wyatt Volkman LLD, I am a handsome, rich, comfortable, lively, zealous, graceful, gifted person who loves writing and wants to share my knowledge and understanding with you.