To understand the difference between SDS and MSDS, it’s important to know what the Globally Harmonized System is and how it has impacted the move from MSDS to SDS.
Globally Harmonized System of Classification and Labelling of Chemicals
The Globally Harmonized System of Classification and Labelling of Chemicals also known as GHS is an internationally agreed-upon standard managed by the United Nations that was set up to replace the assortment of hazardous material classification and labelling schemes previously used around the world. It is the culmination of many years of discussion between governments and industries.
What is theGlobally Harmonized System (GHS)?
The GHS is a system for harmonizing hazard classification criteria and chemical hazard communication elements worldwide. The GHS is not a regulation; rather it is a framework or guidance for classifying and labeling hazardous chemicals. The purpose of classification under the GHS is to provide harmonized information to users of chemicals with the goal of enhancing the protection of human health and the environment.
Around the world, countries have regulatory systems for chemical classification and hazard communication. The systems may look similar, but their differences can lead to multiple interpretations and inconsistencies for classifications, labels andSafety Data Sheets (SDS)for the same product. Moving to one standard in the age of global trade simplifies regulations and improves the safety of workers who interact with chemical hazards.
From MSDS to SDS
MSDS (Material Safety Data Sheet) is now called an SDS (Safety Data Sheet). The transition from MSDS to SDS began in the early 2000s and has continued worldwide.
The purpose of bothMSDS and SDSdocuments remains unchanged and is to list the information pertaining to theoccupational health and safetyfor the various uses of the substances and products.MSDS and SDS arewhere you go if youneed more information on the product and what to do if there is exposure to the product or a spill.
MSDS vs SDS
Since the shift from MSDS to SDS, the information and verbiage on the documents have changed.What was known as “controlled products" onthe MSDSare now called "hazardous products" onthe SDS. Suppliers are still responsible for classifying their products, writing labels, authoring SDSs, and sendingthese labels with the products at the time of sale.
SDS Signal Words
SDSs,unlike MSDSs, now have signal words, these include:
Warning - which means a less serious hazard
Danger- which means a more serious hazard.
Hazard Classifications
HazardClassifications for the producton an SDSinclude:
Health Hazard Classes: these are based on the ability of the product to impact health such as eye irritation, respiratory sensitization, or carcinogenicity.
Physical Hazard Classes: these are based on the physical or chemical properties of a product such as reactivity, flammability, or corrosivity.
Environmental Hazard Classes: this classification is not mandatory under WHMIS 2015 but is based on things like aquatic toxicity.
These are broken down further into categories.
Labels
The MSDS did not mandate specific labeling, while the SDS made it necessary for manufacturers and importers to include labels and precautionary statements. Under the new SDS requirements, labels must now include:
- A hazard statement for each hazard class and category
- A pictogram
- A signal word
Sections of MSDS vs Sections of SDS
MSDSs had 9 sections and they varied greatly in structure and information. SDSs now have a standard 16-section format with signal words (Warning or Danger), universally standardized hazard and precautionary statements, and hazard pictograms.
Hazard pictograms are now red and white symbols or a Red Square tilted 45°on a point Pictogram.
