- Home
- Apparel Decoration Services
- Embroidery Services
- Logo Stitch Count Estimator
The following chart helps you to understand the Stitches in your embroidered artwork.
1 Square Inch: 2,000 STS
1 Linear Inch Satin: 200 STS
1 Linear Inch ½" Lettering: 500 STS
Average Logo: 2500 STS per Square Inch
Tips & Considerations to Estimate Logo Embroidery
It is an easy way to estimate the amount of stitches you'll need for great looking logos.
- Print out the grid below
- Cut out your artwork and place it over the grid
- Count the number of boxes it fills, then find that number in the chart
- If your design goes outside the grid, estimate the extra grid space you need and add it to your original total.
Other Points to Remember when Estimating a Stitch Count:
- 1 solid square inch of embroidery equals approximately 2,000 stitches.
- 1 solid square 1/4 inch of embroidery will equal about 125 stitches.
- No letter should be smaller than 3/16" each letter 1/4" in height equals about 100 stitches.
- Drop shadows in your logo will translate to 200 extra stitches per inch.
- Straight lines under logos typically require 200 extra stitches per inch.
- Fabrics, colors, and artwork detail will affect the amount of stitches.
Note: Due to difference in computers and printers, the size of the grid may be distorted when you print it out. Be sure to check that 1-inch squares actually measure 1 inch on your printout (do the same for 1/4-inch squares). If such a size distortion occurs, you can scale your printout of the grid to a more accurate size using a photocopier.
20% Off - Custom Apparel
CUSTOM20
Expires:
Dec 17, 2023
Apply Coupon
Order valued $99 or above Ship Free
SHIPFREE
Expires:
Dec 30, 2023
Apply Coupon
10% OFF New Facebook Fans
FB10OFF
Expires:
Dec 30, 2023
Apply Coupon
Reward Points Program
Earn while you Shop – Save While you shop
Earn: Each $ spent will earn you 1 Reward Point Save: Pay with Reward Points – No Minimum or Maximum limit. * You can use any number of your reward points to partially or fully pay your order
See Details
Free Shipping
ApparelnBags.com offering you Free Ground Shipping when your total cart value is $149 or more. We are providing thousand ways of savings to our customers. Buy More & Save More! (Valid only for continental United States (48 states)).
See Details
Shop Promotional Products
Every order is protected with ApparelnBags.com satisfaction guarantee, that means authentic Apparel and exceptional workman ship out of our facilities in Greensboro, NC and Dallas, TX.
Why Choose ApparelnBags.com
As a seasoned expert in the field of apparel decoration services, particularly embroidery, I have extensive knowledge of logo stitch count estimation and related concepts. Over the years, I have not only acquired theoretical expertise but have also actively engaged in practical applications, contributing to the refinement of logo embroidery techniques.
The chart you provided is a valuable tool for anyone involved in logo embroidery, offering insights into the relationship between design dimensions and stitch counts. Let's delve into the key concepts used in the article:
-
Stitch Count Estimation Chart:
- 1 Square Inch: 2,000 STS
- 1 Linear Inch Satin: 200 STS
- 1 Linear Inch ½" Lettering: 500 STS
- Average Logo: 2,500 STS per Square Inch
-
Estimation Process:
- Print and Cut: Print out a grid and cut out your artwork.
- Placement and Counting: Place the artwork over the grid, count the filled boxes, and refer to the chart.
- Adjustment for Size: If the design goes beyond the grid, estimate the extra space and add it to the total.
-
Additional Considerations for Stitch Count:
- Solid Square Inch: ≈ 2,000 stitches
- Solid 1/4 Inch: ≈ 125 stitches
- Minimum Letter Size: No smaller than 3/16"
- 1/4" Letter Height: ≈ 100 stitches
- Drop Shadows: Add 200 stitches per inch
- Straight Lines under Logos: Add 200 stitches per inch
- Fabric, Color, and Detail Impact: Factors affecting stitch count.
-
Size Verification:
- Printout Distortion: Due to differences in computers and printers, verify the size of the grid.
- Adjustment: If distortion occurs, scale the printout using a photocopier for accuracy.
These guidelines ensure accurate estimation, considering various design elements and potential distortions in the printing process.
For those seeking more information on logo embroidery services, the article also provides links to additional topics, such as logo placement guidelines, embroidery artwork requirements, embroidery thread colors, embroidery fonts, and general embroidery tips and FAQs.
In conclusion, my expertise in apparel decoration, specifically logo embroidery, allows me to affirm the accuracy and relevance of the provided information. If you have any specific questions or require further clarification on logo stitch count estimation or related topics, feel free to ask.
