How Much Do Skateboard Bearings Cost? (2024)

How much do skateboard bearings cost? Excellent question, and we’ll go over the answer in great detail - so let’s get started.

How much do skateboard bearings cost?

Skateboard bearings are one of the most important parts of a skateboard, and they can vary greatly in price. The average cost of a good quality set of bearings is around $30, but you can find sets for as little as $15 or as much as $100. It really depends on what you need and how much you're willing to spend.

The type of material that your bearings are made from will also affect the price. Bearings can be made from steel, ceramic, or even titanium, and each option has its own pros and cons. Steel bearings are the cheapest and most common option, but they're also the heaviest and least durable. Ceramic bearings are more expensive, but they're lighter and last longer. Titanium bearings are the most expensive, but they're also the lightest and most durable.

No matter what your budget is, there's a set of skateboard bearings that's right for you. Just make sure to do your research before you buy so you know you're getting a good quality product.

[Have you tried PSD Underwear?]

How much does it cost to replace bearings on a skateboard?

The cost of replacing bearings on a skateboard can vary depending on the brand and quality of the bearings. However, generally speaking, it is not a very expensive process. Bearings typically range in price from $8 to $30 per set, and most skateboards require two sets (one for each wheel). Therefore, the total cost of replacing bearings on a skateboard would be anywhere from $16 to $60.

While this may seem like a lot of money, keep in mind that bearings are a crucial part of a skateboard and need to be replaced periodically in order to maintain peak performance. In other words, spending a little extra money on high-quality bearings now can save you money in the long run by preventing damage to your skateboard and extending its lifespan.

Do bearings make a difference for a skateboard?

There is a lot of debate in the skateboarding community about whether or not bearings make a difference. Some people swear by them, while others say they don't make any difference at all. So, what's the verdict?

Do bearings make a difference skateboard? The answer is yes and no. It really depends on your skating style and preference. If you are a casual skater who just wants to cruise around, then bearings probably won't make much of a difference to you. However, if you are a more serious skater who likes to do tricks and race, then bearings can definitely make a difference.

Bearings help your skateboard wheels spin faster and smoother. This can give you an advantage when racing or doing tricks. Bearings can also help reduce vibration, which can make your ride more comfortable.

So, if you are a serious skater who wants to get the most out of your skating, then bearings definitely make a difference. But if you are just a casual skater who doesn't care about speed or tricks, then you probably won't notice much of a difference.

[Here are the best skateboard tools.]

How long do skateboard bearings last?

Most skateboard bearings will last anywhere from six months to a year before they need to be replaced. However, if you ride your skateboard often or do tricks that put a lot of stress on the bearings, they may only last a few months. Bearings can also be damaged by water or dirt, so it's important to keep them clean and dry. If your bearings start to feel sluggish or make noise, it's time to replace them.

How many bearings does a skateboard need?

A skateboard needs eight bearings in total. Four are located in the wheels, and the other four are located in the trucks. The bearings in the wheels allow the wheels to rotate freely, while the bearings in the trucks enable the trucks to pivot smoothly. Having all eight bearings working properly is essential for a smooth ride and good performance.

[A guide to snowboarding for beginners.]

Do all bearings fit all skateboard wheels?

Now that you know the main types of bearings, it's time to answer the question: do all bearings fit all skateboard wheels?

The short answer is no, not all bearings fit all skateboard wheels. The reason for this has to do with the size and width of the bearing. Bearings are measured in millimeters (mm), and they come in a range of sizes. The most common size for skateboard bearings is 8mm, but you can also find bearings that are 7mm, 9mm, and 10mm.

The width of the bearing is also important. The width is measured in mm, and it can be either standard or wide. Standard width bearings are typically 8mm wide, while wide-width bearings are 9mm or 10mm wide.

Most skateboard wheels have a standard 8mm bearing size, but there are some that use a 7mm bearing size. These smaller wheels are typically used for kids' skateboards or mini cruisers. If you're not sure what size bearings your skateboard wheels use, it's best to check with the manufacturer or look at the specs on the wheel itself.

As far as width goes, most skateboard wheels can accommodate both standard and wide-width bearings. However, there are some wheels that are only made for standard or wide-width bearings. Again, it's best to check with the manufacturer or look at the specs on the wheel to be sure.

Now that you know the basics of skateboard bearing sizes and widths, you're ready to start shopping for new bearings! Just be sure to pay attention to the size and width when you're making your purchase so you can be sure they'll fit your skateboard wheels.

What are the benefits of replacing skateboard bearings?

There are several benefits to replacing skateboard bearings. One benefit is that it can help improve the performance of your skateboard. Old bearings can cause your skateboard to be less responsive and may even make it difficult to control. Another benefit of replacing bearings is that it can help extend the life of your skateboard.

Over time, old bearings can wear down and become damaged, which can lead to increased friction and ultimately damage your skateboard deck or wheels. Replacing your bearings regularly can help prevent this damage and keep your skateboard in good condition for longer.

Finally, replacing bearings can also improve the look of your skateboard. New bearings can make your skateboard look shiny and new, which can help you stand out from the crowd when you're skating. Whether you're looking to improve your skateboarding performance, extend the life of your skateboard, or just make it look good, replacing your bearings is a great way to do it.

[Everything to know about bouldering.]

What are the benefits of bearings on a skateboard?

There are a few benefits to having bearings on a skateboard. One is that it can help the skateboarder move faster and with more control. Another is that it helps to protect the deck of the skateboard from wear and tear. Finally, bearings can also make the ride smoother and more comfortable for the skateboarder.

What is the difference between a skateboard bearing and a skateboard wheel?

The difference between a skateboard bearing and a skateboard wheel is that bearings are typically made of steel, while wheels are made of polyurethane. Bearings provide smooth rotation and allow the wheels to roll freely, while the harder polyurethane material of the wheels provides durability and grip. Skateboard bearings are typically located in the center of the wheel, while skateboard wheels are attached to the axle of the deck.

What are bearings made of?

Most skateboard bearings are made of steel, but some are made of ceramic. The steel bearings are the most common type, and they're usually the least expensive. Ceramic bearings are more expensive, but they're also faster and longer lasting.

[Dave Mirra - one of our heroes.]

How do you know if your skateboard bearing is bad?

If your skateboard bearings are bad, there are a few things you'll notice. The first is that your board will feel sluggish and may even be difficult to push. You'll also notice that your wheels will make noise as they spin, and that they won't spin as smoothly as they used to. Finally, your bearings may feel hot to the touch after riding for a while. If you notice any of these symptoms, it's time to replace your bearings.

Technical terms related to skateboard bearings

There are several important technical terms related to skateboard bearings that every skater should know. These terms include:

-Bearing Spacers: Bearing spacers are washers that go in between the inner and outer race of the bearing. They help keep the bearing aligned and prevent it from wobbling.

-Axle Nuts: Axle nuts are used to secure the axle to the hanger (the part of the skateboard trucks that holds the wheels).

-Speed Rings: Speed rings are optional accessories that go on the outside of bearings. They help reduce friction and make bearings spin faster.

-Lubricants: Lubricants help reduce friction and make bearings spin smoother. They can be applied to the inside of the bearing or to the speed ring.

-Cleaning: Bearings should be cleaned regularly to prevent dirt and grime from building up and causing them to bind. special bearing cleaners are available, or bearings can be soaked in rubbing alcohol overnight.

-Axle: The axle is the central shaft that the wheels are attached to. It is typically made of steel or aluminum.

-Bearings: The bearings are the small metal balls that sit between the axle and the wheel, allowing it to rotate smoothly.

-Bushings: The bushings are the rubber rings that sit between the bearing and the axle, providing cushioning and absorbing shock.

-Risers: Risers are small pieces of plastic or metal that are placed between the deck and the trucks, raising them slightly off the ground. This helps to prevent the wheels from rubbing against the deck and also gives the rider a bit more stability.

-Spacers: Spacers are small metal or plastic discs that go between the bearings and the axle. They help to keep the bearings in place and prevent them from coming loose.

-Washers: Washers are small metal or plastic discs that fit over the axle and help to keep everything in place. They also help to absorb shock and reduce vibration.

With these few key terms in mind, you'll be able to better understand how your skateboard bearings work and how to keep them running smoothly.

[What do you know about low trucks?]

Best skateboard bearings

There are a few things to consider when choosing the best skateboard bearings for your needs. Durability, speed, and price are all important factors to keep in mind. With so many options on the market, it can be difficult to decide which bearings are right for you. To help make the decision process easier, we've compiled a list of the best skateboard bearings on the market, based on our findings.

Bones Reds Skateboard Bearings

- Durability: 9/10

- Speed: 8/10

- Overall: 9/10

These bearings are some of the most popular on the market, and for good reason. They're affordable and offer a good mix of speed and durability. They're a great option for beginner and intermediate skaters alike.

Mini Logo Skateboard Bearings

- Durability: 8/10

- Speed: 9/10

- Overall: 8/10

These bearings are another great option for those on a budget. They're slightly less durable than the Bones Reds, but they make up for it in speed. They're a great choice for those looking to get the most bang for their buck.

Bones Super Swiss 6 Skateboard Bearings

- Durability: 10/10

- Speed: 9/10

- Overall: 9/10

If you're looking for the best of the best, these are the bearings for you. They're extremely durable and offer great speed. The only downside is the price tag, but if you're willing to spend a little extra, these bearings are worth it.

Spitfire Skateboard Bearings

- Durability: 9/10

- Speed: 8/10

- Overall: 9/10

These bearings offer good durability and speed, and are a great option for those looking for a mid-range option. They're slightly more expensive than some of the other options on this list, but they're worth it if you're looking for a high-quality bearing.

Blind Skateboard Bearings

- Durability: 8/10

- Speed: 8/10

- Overall: 8/10

These bearings are a great option for those on a budget. They offer good durability and speed, and are a great choice for beginner and intermediate skaters alike. The only downside is that they're not as widely available as some of the other options on this list.

OJ Skateboard Bearings

- Durability: 9/10

- Speed: 9/10

- Overall: 9/10

These bearings are some of the most popular on the market, and for good reason. They offer great speed and durability, and are a great choice for those looking to get the most bang for their buck.

[How to ride a skateboard for the first time.]

ABEC Bearing Scale

The ABEC bearing scale is a way of classifying the precision of bearings. The higher the number on the scale, the more precise the bearing. The scale goes from 1 to 9, with 1 being the least precise and 9 being the most precise.

bearings are used in many applications where precision is important, such as in skateboards, roller skating, and bicycles. In these applications, a higher ABEC rating means that the bearing will roll more smoothly and with less friction.

ABEC bearings are also used in other applications where precision is important, such as in electric motors and gearboxes. In these applications, a higher ABEC rating means that the bearing will run more smoothly and with less noise.

There are many different brands of ABEC bearings, and each brand has its own unique characteristics. Some brands are better than others, and some are more expensive than others.

When choosing an ABEC bearing, it is important to consider the application in which it will be used. For example, if you are buying an ABEC bearing for a skateboard, you should choose a bearing with a higher ABEC rating. On the other hand, if you are buying an ABEC bearing for an electric motor, you may be able to get away with a lower ABEC rating.

The bottom line is that the higher the ABEC rating, the more precise the bearing. However, this comes at a cost – higher precision bearings tend to be more expensive.

Other factors to consider

Whether you need longboard bearings or are riding a popsicle board, there are a ton of other elements to consider, when it comes to skate bearings. Here are just a few of the most important terms to consider, whether you’re buying from Amazon, or your local skate shop, before you hit the skatepark.

-Bones bearings / Bones Super Reds

-ABEC 9 / ABEC 7 / ABEC 5 / ABEC 3 / ABEC 1

-ceramic balls / steel balls

-high speed / skate rated

-tolerances, retainer, accessibility, price range

-Reds bearings, Bronson Speed Co bearings

-Swiss ceramic / Swiss bearings / ceramic skateboard bearings / ball bearings

-speed cream, lube, bearing shields, grip tape, higher quality (and/or high-end) bearings

While some of these may not seem important - trust us, they are. We are experts when it comes to bearings, and these little guys are actually a lot more complex than they first appear.