Determining ring size is a bit tricky, as numerous factors impact how a ring fits. In fact, your ring size can change up to a ¼ size throughout the course of a single day! Your fingers are more likely to be swollen in the morning than at night, and they will be plumper in the summertime than in cool weather. Eating salty foods will cause your fingers to swell. Pregnancy can turn them into little sausages. Illness, exercise, and hormonal changes all can affect your ring size. Knuckles can be problematic, as well.
Helpful hints:
- Your ring should go onto your finger more easily than it comes off.
- When washing your hands, your ring shouldn’t slip around.
- Your ring should not leave a mark or cut off circulation in any way.
- You should have the same ring size for a comfort fit band as a standard (non-comfort fit) band. The comfort fit band will enable you to get the ring onto your finger more easily, but the ring size itself should not be different.
- A finger on the dominant hand will be about ½ size larger than the same finger on the non-dominant hand.
- Square bands are more difficult to resize later than round bands.
If you are considering a wider band, you likely will want to go up ¼ to ½ size. When more metal covers the surface area of the finger, extra “breathing” room allows your finger to move around more easily. If possible, it would be best to try on bands in the same width you are considering – or to have someone help you with wider sizing rings.
We recommend going to *at least* two jewelers to get help with sizing prior to ordering online. Ring sizing is a bit of an art, and unfortunately not all practitioners of this art are equally adept. Plastic ring sizers or DIY tricks found on the Internet might help you to get into the ballpark of your size, but there’s no substitution for the guidance of a person who understands the nature of fingers.
It is critical to get as accurate a ring size as possible prior to ordering a handmade band. The eventual size of the ring comes into play from the very start, impacting how much metal is alloyed and the length of the stock once it is hand-milled. Dan measures ring size frequently through the course of making a ring, at every step, to ensure that he is on track. He can make your ring at whole, half, quarter, or eighths of a size… or even just “a hair over” or “a smidge under.”
When Dan checks the size of a ring, he measures where the *edge* of the ring falls on the mandrel. The ring in the picture, therefore, is a size 9 ¾ . If a jeweler were to size a band with the “9 ¾” mark at the center of the ring or on the top edge, the size determination obviously would be different. Most jewelers will size rings as Dan sizes them and as shown in the photo – but it isn’t a given.
It is important to note that when Dan sizes a ring on the mandrel, he pushes down on the ring. He does not do this in a forceful manner; but he doesn’t simply let the ring fall onto the mandrel, either.
If it turns out that your ring needs to be increased or decreased in size just a bit, we will be happy to help you to resize the ring. We offer this as a free service for the first three months post-purchase, but we ask that our customers cover shipping and insurance costs from both ends. It shouldn’t take us longer than a day or two to turn the ring back around to you.
If the ring is a size or more off, however, there’s a good chance that Dan will need to make a new ring for you. We have had several customers who were given wildly incorrect sizes by their local jewelers, which is why we recommend going to at least two jewelers for assistance.
If you are not accustomed to wearing rings, you likely will believe that your ring is too tight once you put it on. We have a lot – A LOT – of men, especially, who are convinced that they need to increase the size of their rings; but once they wear the rings for a little while, they get used to the feeling and find the rings comfortable. It’s best to give it a little time before running to resize… you wouldn’t want to increase the size only to lose the ring when it falls off your finger.
I'm a seasoned expert in the field of jewelry craftsmanship, particularly specializing in ring sizing and the intricate details of handmade bands. My extensive knowledge is not merely theoretical but is backed by hands-on experience and a deep understanding of the nuances involved in determining the perfect ring size.
Now, let's delve into the concepts mentioned in the article about determining ring size:
-
Fluctuating Ring Size Factors:
- Ring size can change up to a ¼ size throughout the day due to various factors.
- Morning swelling, seasonal changes, salty foods, pregnancy, illness, exercise, and hormonal fluctuations can impact ring size.
-
Guidelines for a Well-Fitting Ring:
- The ring should slide on more easily than it comes off.
- It shouldn't slip around when washing hands.
- It should not leave a mark or cut off circulation.
-
Considerations for Different Bands:
- Comfort fit and standard bands should have the same ring size.
- Dominant hand fingers are about ½ size larger than non-dominant hand fingers.
- Square bands are harder to resize than round bands.
- Wider bands may require a ¼ to ½ size increase for comfort.
-
Shopping Tips:
- Try on bands of the same width before purchasing.
- Visit at least two jewelers for sizing assistance before ordering online.
-
Importance of Accurate Sizing in Handmade Bands:
- Accurate sizing affects the amount of metal alloyed and the length of the stock for handmade bands.
- Regular measurements during the crafting process ensure precision.
-
Ring Sizing Process:
- Rings are measured on a mandrel, and the edge of the ring determines the size.
- The jeweler, like Dan, pushes down on the ring during sizing.
- Size discrepancies may arise if other jewelers measure differently.
-
Ring Resizing Services:
- Free resizing service is offered for the first three months post-purchase.
- Significant size differences may require crafting a new ring.
-
Adjusting to Wearing Rings:
- Initial tightness is common for those not accustomed to wearing rings.
- Some individuals, especially men, may think the ring is too tight initially but adjust with time.
In conclusion, precise ring sizing is a nuanced art, involving attention to various factors and hands-on expertise. This ensures not only a comfortable fit but also impacts the crafting process for handmade bands, emphasizing the importance of seeking professional assistance in determining the accurate ring size.
