Whether you are repairing your broken golf club or buying a new golf club, there are a few things you should know before choosing a golf shaft. The first thing is to decide is what type of golf shafts you would prefer, followed by shaft flex, kick-point, torque rating and length. Each of these different aspects of golf club shafts that can influence the performance of your club, and each must be carefully considered before you put in an order. Read on to find out all about how to pick the right golf shaft for you in this guide.
Here’s how to choose the right golf shaft
Photo credit: optimarc / Shutterstock
Types of golf shafts
There are two basic types of golf shafts: steel andgraphite. Often, your club will have been originally assembled with either ofthese types of shafts, however if you decide that you would like to change yourtype of shaft, you should know the difference between each shaft type. Thereare some newer options that combine the two materials, known as multi-materialshafts.
– Steel shafts
Steel shafts are much heavier, more durable and aregenerally less expensive than their graphite counterparts. They are often madefrom carbon steel, but stainless steel is sometimes used, and start at 120grams.
Many players will benefit from having steel irons as torqueor lateral twisting found in all graphite shafts doesn’t occur in steel. Therefore,steel shafts offer more control and have greater emphasis on accuracy thandistance, which means that a faster swing speed is required to generate thesame distance as a graphite shaft.
Steel shafts arerecommended for players with normal swing speeds, who could do with morecontrol when playing.
– Graphite shafts
Graphite shafts are much lighter, less durable and moreexpensive in comparison to steel shafts, and weigh between 50 and 85 grams – around half the weight of a steel shaft!These light-weight shafts help to provide a greater swing speed for more power,however, it sacrifices control due to the flex generated in the swing.
As a result, graphite shafts are a good choice for all golfers. In particular, they are suited to women golfers and seniors, who may struggle to produce a fast-enough swing speed to use a steel shaft effectively.
This shaft type often comes with an extensive range,including a variation in flexes and colours, which appeals to amateurs andprofessionals alike.
– Multi-material shafts
A recent addition to the market are multi-material shaftswhich are used on both irons and drivers. This type of shaft incorporates steeland graphite into one shaft to get the best of both worlds for each player, tosuit all playing types.
Generally, the shaft is made using a steel shaft that has a graphite tip. The steel shaft allows the player to control the ball flight more, whilst the graphite tip ensures the golf ball can go the distance without any unwanted vibrations.
RELATED: Quick Golf Club Size Guide for Beginners
Shaft technology
– What golf shaft flex is right for me?
Put simply, the flex determines a golf club shaft’s ability to bend during a swing, affecting the distance and direction. Therefore, getting the right flex in your golf clubs is important.
Which flex rating you use will depend on the type of swing you have. For example, beginners and those with less powerful swings tend to use a shaft with greater flexibility to propel the ball more. On the other hand, if a player has a high and powerful swing speed, they will require a stiffer shaft with less flex.
There are a range ofdifferent types of flex ratings:
- Extra stiff (XS)
- Stiff (S)
- Firm (F)
- Regular (R)
- Senior (S)
- Amateur (A)
- Ladies (L)
It is worth bearing in mind that different shaft manufacturers vary in their specifications of flex – for example, one manufacturer’s “regular flex” might be another’s “firm flex”. Furthermore, all shafts, no matter how stiff, exhibit flex in one way or another.
– Golf Shaft Flex Chart
Even though getting fitted for a specific shaft is the best way to find the right shaft, this chart will give you some general guidelines that can help get you started in the right place:
| Carry Distance | Swing Speed | Flex |
| Under 200 yards | Under 75 mph | Ladies or Senior |
| 200 to 240 yards | 75 to 95 mph | Regular |
| 240 to 275 yards | 95 to 110 mph | Stiff |
| Over 275 yards | Over 110 mph | Stiff or Extra Stiff |
RELATED: Do I Need Custom Fitted Golf Clubs?
– What is the kick point on a golf shaft?
The shaft kick-point – also known as flex-point – is thepoint where the shaft bends and affects the trajectory of the shot. Althoughthe effect is only small, it is still measurable.
For clarity, a shaft with a high kick-point will often givea low shot trajectory and create the feel of a “one-piece”. On the other hand,a low kick-point will usually give a high shot trajectory and a feeling of theshaft tip whipping the clubhead through.
– What is shaft torque?
Every shaft has a torque rating, which is measured indegrees, in order to determine how much the shaft will twist during a swing. Putsimply, the higher the rating, the more the shaft is prone to twisting.
It is the torque that also determines how the shaft feels toevery player, which means that the higher the rating, the softer the shaft willfeel. A shaft with a 3-degree torque will feel much stiffer than a 5-degreetorque, for example.
Every shaft – whether it be graphite or steel – has a certain amount of torque. You won’t be able to get rid of torque completely, but it is worth remembering that the lower the torque, the lower the trajectory will be.
Golf club shaft length
Once the shaft is installed onto your golf club, you mustdetermine the right length for you. But how important is shaft length, we hearyou say? Well, the importance of length, according to research, is extreme. Forinstance, ball impact that is 0.5 inches off-centre equates to a 7% loss ofcarry distance, and an impact that is 1 inch off-centre equates to a 14% lossof carry distance. So, the key to choosing the right shaft is finding the correctlength that provides a repeating, solid hit each time.
– How to measure the length of a golf club shaft?
In order to determine the length of your club, stand talland get someone to measure from the crease where your wrist and hand meet tothe floor. Do this with both hands and take an average of the two measurements.
The following lists what length of shafts you shouldconsider for certain heights. If the crease where your wrist and hand meet tothe floor is:
- 29 to 32 inches = irons should be based on a5-iron of 37 inches
- 33 to 34 inches = irons should be based on a 5-ironof 37 1/2 inches
- 35 to 36 inches = irons should be based on a5-iron of 38 inches
- 37 to 38 inches = irons should be based on a5-iron of 38 1/2 inches
- 39 to 40 inches = irons should be based on a5-iron of 39 inches
- 41 or more inches = irons should be based on a5-iron of 39 1/2 inches
How to know if you have picked the wrong shaft?
If you have picked the wrong shaft, you will immediately know. When you go to swing the club, you will find that the ball won’t go as far as it should, and you may hit the ball off-centre. You may also find that the club may feel “dead” if the shaft is too heavy or stiff, or alternatively it can feel too soft and weak – both can significantly impact your game. Therefore, if you don’t know what to do, don’t guess, because you may end up with the wrong shaft for you and it can be costly to rectify if you have to buy more shafts or new golf equipment.
If you don’t know, don’t guess – get custom fitted
Custom fitting – which was once reserved only for Tour players and the best amateurs – is now available to any golfer who’s willing to spend the time and money to get a properly fitted set of clubs.
With today’s technology and vast number of products toexamine, an experienced club fitter can help anyone find the right club shaftfor their golf club. Custom fitting can be done with woods, irons, wedges andeven putters from most manufacturers, and professional fitters will work withyou to decide the custom fit lie angles, face angles, lofts, lengths, swingweights and other options.
Custom fitting may well increase the cost of your set of clubs, but the benefits in terms of performance (and not changing clubs so often) are definitely worth the extra money. This is seen by our team in this YouTube video, demonstrating with a golf driver:
Get in touch with our PGA professional fitter today on 0844 324 6766, or talk to a member of staff in store, to book a custom fitting.
Feature image credit: optimarc / Shutterstock
I'm an avid golf enthusiast with a wealth of experience in club customization and golf shaft technology. Having spent numerous hours on the course and delving deep into the technical aspects of golf equipment, I can confidently guide you through the intricacies of choosing the right golf shaft.
Types of Golf Shafts
Steel Shafts
Steel shafts, typically made from carbon or stainless steel, offer durability and control. They are heavier than graphite shafts, providing more accuracy and control over distance. These are recommended for players with normal swing speeds who prioritize control over sheer distance.
Graphite Shafts
Graphite shafts are lighter, allowing for increased swing speed and power. They are less durable than steel shafts but are an excellent choice for players with slower swing speeds, such as women and seniors, as they enhance distance. Graphite shafts come in various flexes and colors, catering to a wide range of golfers.
Multi-material Shafts
A recent addition to the market, multi-material shafts combine steel and graphite for a balanced performance. These shafts aim to provide the benefits of both materials, offering control with a steel shaft and distance with a graphite tip.
Shaft Technology
Golf Shaft Flex
The flex of a golf shaft determines its ability to bend during a swing, impacting distance and direction. Different flex ratings cater to various swing types, ranging from extra stiff to ladies. Beginners often benefit from greater flexibility, while players with powerful swings require stiffer shafts.
Kick Point
The kick point, or flex-point, influences the trajectory of the shot. A high kick-point results in a low shot trajectory, while a low kick-point produces a higher trajectory. This subtle factor contributes to the feel of the swing.
Shaft Torque
Shaft torque, measured in degrees, indicates the shaft's tendency to twist during a swing. Higher torque ratings lead to more twisting, providing a softer feel. Lower torque results in a firmer feel and a lower trajectory.
Golf Club Shaft Length
The length of the golf club shaft significantly affects performance. Research shows that even a small deviation in shaft length can lead to a considerable loss of carry distance. It's crucial to choose the right length for a repeating, solid hit.
How to Choose the Right Golf Shaft
1. Determine Your Swing Type
- Consider your swing speed and power.
- Beginners may prefer more flexible shafts, while powerful players need stiffer options.
2. Understand Kick Point and Torque
- Choose the kick point based on desired shot trajectory.
- Consider torque for the feel of the shaft during the swing.
3. Measure Shaft Length
- Follow guidelines for measuring shaft length based on the crease where your wrist and hand meet to the floor.
4. Consider Custom Fitting
- Opt for custom fitting to ensure the perfect match between your swing and the golf shaft.
- Custom fitting may increase costs but offers significant performance benefits.
In conclusion, selecting the right golf shaft involves a nuanced understanding of your swing, preferences, and the technical aspects of shaft design. Don't hesitate to invest in custom fitting for a tailored golf club that enhances your performance on the course.
