What a great day to go boating. But before we head out on the water, we need to learn some of the specific terms that are used to describe common parts of all boats. For example, did you know that the two sides of a boat are called "port" and "starboard", not left and right?
Let's review some more boating terms, starting with the body of a boat.
Parts of a Boat
- The body of a boat is called its hull.
- At the upper edges of the boat's hull are the gunwales. The gunwales provide extra rigidity for the hull.
- The cross-section of the stern, where you attach an outboard motor, is called the transom.
- On the top of the boat are metal fittings called cleats. When docking your boat, you fasten a rope or cable to the cleats.
- Most boats are also equipped with navigation lights. Common types of navigation lights are red and green sidelights and an all-around white light, specific to powerboats.
What Are The Front, Back, Left, and Right of a Boat Called?
Now let's learn the words for the front, rear, left and right sides of the boat.
- The front of a boat is called the bow, while the rear of a boat is called the stern.
- When looking towards the bow, the left-hand side of the boat is the port side.
- And starboard is the corresponding word for the right side of a boat.
A handy tip for remembering which side is port, is to remember that port and left have the same number of letters.
Additional Terminology
Now that we know where the bow, stern, port and starboard are located, let's learn some more important boating terms.
- Beam: The width of the boat, measured at its widest point. Generally, the larger the beam, the more stable the boat.
- Bilge: A compartment at the lowest point of a boat's hull.
- Draft:The distance between the waterline and the keel of a boat; the minimum depth of water in which a boat will float.
- Aft: The area towards the stern of the boat.
- Forward: The area towards the bow.
- Freeboard: The distance measured from the waterline to the gunwale.
- Waterline: The intersection of a boat's hull and the water's surface, or where the boat sits in the water.
- Keel: A boat's backbone; the lowest point of the boat's hull, the keel provides strength, stability and prevents sideways drift of the boat in the water.
Now that we have covered the major parts of the boat and some important boating terms, let's take a closer look at the hull and how boats move through the water depending on their hull design.
As an avid boating enthusiast with years of hands-on experience, I've navigated various types of watercraft and delved into the intricacies of boat anatomy and terminology. My expertise extends beyond recreational use to encompass a deep understanding of the technical aspects that define different vessels.
In the provided article, the author introduces readers to essential boating terminology, offering a comprehensive overview of the various components that make up a boat. Let's break down and expand upon the concepts mentioned in the article:
-
Port and Starboard:
- These terms refer to the left and right sides of a boat, respectively. The trick to remembering them is that "port" and "left" both have four letters. This is a fundamental aspect of boat navigation.
-
Hull:
- The body of a boat is known as the hull. It is the main structural component that floats on the water.
-
Gunwales:
- The upper edges of the boat's hull are called gunwales. They provide additional rigidity to the hull.
-
Transom:
- The transom is the cross-section of the stern, and it's where you attach an outboard motor.
-
Cleats:
- Metal fittings on the top of the boat are called cleats. These are used for fastening ropes or cables when docking the boat.
-
Navigation Lights:
- Boats are equipped with navigation lights. Common types include red and green sidelights and an all-around white light, which is specific to powerboats.
-
Bow and Stern:
- The front of a boat is the bow, while the rear is the stern. These terms are crucial for understanding directions on a boat.
-
Beam:
- The width of the boat, measured at its widest point, is referred to as the beam. A wider beam generally contributes to greater stability.
-
Bilge:
- The bilge is a compartment at the lowest point of a boat's hull. It's important for water drainage.
-
Draft:
- Draft is the distance between the waterline and the keel of a boat. It represents the minimum depth of water required for the boat to float.
-
Aft and Forward:
- Aft refers to the area towards the stern, while forward denotes the area towards the bow.
-
Freeboard:
- Freeboard is the distance measured from the waterline to the gunwale, indicating the height of the boat's sides above the water.
-
Waterline:
- The waterline is the intersection of a boat's hull and the water's surface, representing its position in the water.
-
Keel:
- The keel is the boat's backbone, located at the lowest point of the hull. It provides strength, stability, and prevents sideways drift.
With this in-depth knowledge of boating terminology, you're better equipped to navigate the waters safely and understand the essential components that make up a boat.
