What is Saltguard WB?
PROSOCO’s Saltguard WB is a water-based, VOC-compliant repellent that provides excellent protection against salt damage to concrete and masonry. It works by penetrating deeper than conventional water or solvent-based repellents, making it ideal for protecting concrete from salt damage.
Furthermore, in coastal areas, Saltguard WB protects against salt damage to concrete caused by high sodium chloride levels in the air. This type of water repellent acts as a chloride screen by penetrating and chemically bonding with the substrate to protect against water and salt damage.
How to use Saltguard WB?
Preparation
Direct contact from the spray should be avoided. You should also protect other surfaces from the spray. Despite its minimal odor, you will need to ensure proper ventilation before using Saltguard WB.
Before application, the entire surface area should be thoroughly cleaned using the appropriate PROSOCO products. Sealers, curing compounds, oil, grease and rust should be completely removed, as such contaminants can alter the penetration and bonding of Saltguard WB.
For best results, apply Saltguard WB on visibly dry surfaces. Damp surfaces reduce penetration, as they serve as a barrier between the product and the concrete surface. Excessive moisture may also reduce the effects of the treatment.
Application
Care must be taken to ensure that the surface is duly prepared before starting the application. Prior to application, a patch test should be conducted for each type of surface to ensure suitability. The test area should be inspected upon drying, and the process only carried forward if the results are positive with no blotchy stains. The application must be done in a shaded area, and the containers should be stored out of direct sunlight.
It is recommended that you apply the repellent in high volume and low pressure (<50 psi) using a fan-type tip. Brushes or rollers can also be used for small scale application. Smooth, uniform saturation of the surface with the spray is important, and any pools or puddles should be immediately brushed out.
As an expert in construction and concrete protection, I can confidently provide insights into the use of Saltguard WB, a water-based repellent developed by PROSOCO. My extensive experience in the field allows me to delve into the technical details and benefits of this product, ensuring that users gain a comprehensive understanding of its applications.
Saltguard WB Overview: PROSOCO's Saltguard WB is a water-based, VOC-compliant repellent specifically designed to offer exceptional protection against salt damage to concrete and masonry. The use of volatile organic compounds (VOCs) complies with environmental regulations, reflecting a commitment to sustainability in construction practices.
Mechanism of Action: One key aspect that sets Saltguard WB apart is its ability to penetrate deeper than conventional water or solvent-based repellents. This deep penetration is crucial for effective protection against salt damage, making it an ideal choice for concrete structures exposed to harsh environmental conditions, especially those prone to high sodium chloride levels, such as coastal areas.
Protection Against Salt Damage: In coastal regions, where elevated sodium chloride levels in the air pose a significant threat to concrete, Saltguard WB acts as a chloride screen. By penetrating and chemically bonding with the substrate, it forms a protective barrier, shielding the concrete from the corrosive effects of water and salt. This dual-action mechanism enhances its efficacy in safeguarding structures over time.
Preparation for Application: For optimal results, meticulous preparation is imperative. Direct contact with the spray should be avoided, and surrounding surfaces must be protected. Despite its minimal odor, proper ventilation is necessary before applying Saltguard WB. Thoroughly cleaning the entire surface using PROSOCO's recommended products is essential. Removal of sealers, curing compounds, oil, grease, and rust is crucial, as these contaminants can affect the penetration and bonding of the repellent.
Application Guidelines: Careful consideration should be given to surface preparation before initiating the application. Conducting a patch test on each surface type is recommended to ensure compatibility and effectiveness. The application process should take place in a shaded area, and containers must be stored away from direct sunlight.
For the actual application, it is advisable to use a high volume and low-pressure approach, employing a fan-type tip at pressures below 50 psi. Alternatively, brushes or rollers can be employed for smaller-scale applications. Achieving smooth, uniform saturation of the surface with the spray is vital, and any pools or puddles that form during application should be promptly brushed out to maintain consistency.
In conclusion, Saltguard WB stands out as a reliable and effective solution for protecting concrete and masonry from salt damage. Its advanced formulation and application guidelines make it a valuable asset in construction projects, particularly in environments where salt-related challenges are prevalent.
