The 9 Best Mold Removers of 2024 (2024)

Mold and mildew can be tough to get rid of on some surfaces like drywall and hardwood, but RMR-86 Instant Mold & Mildew Stain Remover has the ability to effectively remove all varieties of mold and mildew from virtually any surface. This fast-acting and no-scrub powerful formula also tackles odors and instantly targets tough stains left behind by mold and mildew. We also love that it leaves behind a fresh scent. While it’s one of the more expensive products on our list, its effective cleaning power on nearly every surface—including wood, carpet, and concrete—make it worth the price tag.It's a great alternative to using a bleach solution for a quick intervention when yousee mold caused by water damage appear on surfaces after a major storm.

The brand recommends using a mask, gloves, and protective eyewear when using it in either a ventilated or non-ventilated area. While mild cases of mold and mildew can be removed in a matter of seconds or minutes, more severe cases can take several applications over the course of a few hours.

Type: Spray | Size: 32, 128, or 320 fluid ounces | Surfaces: Tile, grout, plastic, PVC, fiberglass, wood, lumber, concrete, stucco, walls

It may seem like mold and mildew require strong cleaning agents like bleach or ammonia. CLR Mold & Mildew Clear, however, gets the job done without using any harsh ingredients, making it our favorite eco-friendly mold remover. It’s even EPA Safer Choice-certified, meaning it meets strict criteria for ingredients, performance, packaging, and more, so you can feel confident about using a safe cleaning product that’s gentle on humans and the planet. Rubino also recommends choosing EPA Safer Choice products like this one when possible.

Because of its natural and foaming spray formulation, this mold remover is safe to use on different surfaces and allows for a more direct and accurate application. For best results, spray the product on the affected area and let the foam work its magic for up to 10 minutes. Wipe off with a dry, clean cloth and repeat the process if necessary.

Type: Foam spray | Size: 32 fluid ounces | Surfaces: Grout, ceramic, hardwood floors, fiberglass, fabric, baseboards, and more

The best way to combat mold and mildew is to take the correct steps in preventing their growth and existence. We love Mold Armor Mold Blocker for its impressive ability to block mold for up to three months. Additionally, it is waterproof, antimicrobial, and works on fabric and all bathroom surfaces where mold and mildew are most prominent.

For best results on fabrics and upholstery, hold the spray bottle four to six inches away and spray until wet without saturating your item, then allow to air dry for at least five minutes. For hard, non-porous surfaces, it’s important to pre-clean before application. Then, spray and let air dry, repeating every seven days for severe mold.

Type: Spray | Size: 32 fluid ounces | Surfaces: Ceramic, shower doors, porcelain, fiberglass, linens, draperies, fabrics, apparel, carpets, bedding, upholstery, furniture

Showers and bathtubs are notorious for housing mold and mildew because of their humid, damp, and usually dark environment. To effectively kill mold in bathrooms, we recommend Clorox Plus Tilex Mold & Mildew Remover. The bottle’s Smart Tube technology also allows it to spray every drop and avoid waste.

For the best results when using this product, spray until the surface is thoroughly wet, let sit for five minutes, and rinse. Since this cleaner contains bleach, do not mix it with other cleaning products containing ammonia. The label recommends using it where there is proper ventilation, and you may also consider using a mask, protective eyewear, and gloves.

Type: Spray | Size: 32 fluid ounces | Surfaces: Glazed ceramic tile, grout, vinyl, fiberglass, plastic, countertops, unwaxed wax floors, sinks

Treating mold growth on wood can be tricky because of wood’s fragility and how easily it can warp when using certain cleaning agents. We love Concrobium Mold Control Spray for eliminating and preventing mold and mildew on treated wood. This product crushes mold spores as it dries, leaving an invisible barrier that also protects surfaces from future mold and mildew growth and eliminates strong, lingering odors. It does not require scrubbing or rinsing and, as a bonus for those with sensitivities, this product is free of bleach, ammonia, and fragrance.

Type: Spray | Size: 14.1, 32 or 128 fluid ounces | Surfaces: Wood, composite wood, drywall, plastic, concrete, shakes, metal, brick, stone, tile, grout, fabric, furniture

Because mold grows so quickly, you may notice it creeping onto your walls and ceilings, especially in damp or warm areas like the bathroom. We recommend Total Solutions Lemocide for its commercial-grade formulation, fresh yet subtle lemon scent, and ability to eliminate mold on a variety of surfaces, including walls. This product is also great at disinfecting and deodorizing hard, non-porous surfaces. Since this is a concentrate, the label recommends diluting it with water 64 to one.

Total Solutions Lemocide is also the best value item on our list. Like many other mold removers, this product does not require scrubbing or rinsing and should be left to dry for best results.

Type: Concentrate | Size: 1 gallon | Surfaces: Walls, metal, steel, porcelain, floors, tables and chairs

Mold and mildew growth isn’t just reserved for hard surfaces and bathrooms. Laundry, fabrics, and upholstery can easily be breeding grounds for mold, especially when left damp for long periods of time. To get rid of mold on laundry, as well as the stains and odors it leaves behind, we recommend OxiClean Laundry & Home Sanitizer. When used as directed, it can also work as a preventative and kill 99.9 percent of bacteria and viruses.

OxiClean Laundry & Home Sanitizer works to disinfect, prevent mold and mildew, and to spot sanitize soft surfaces and carpet. Each process requires mild to moderate wiping or scrubbing and can be repeated every week to disinfect hard, non-porous surfaces and every month for fabrics, carpets, and other soft surfaces.

Type: Powder | Size: 2.5 or 4.5 pounds | Surfaces: Soft surfaces, fabric, carpet, upholstery, non-porous surfaces

Once mold and mildew have been removed from a surface, it’s common for them to leave behind dark, pesky stains. To get rid of these and leave your surface sparkling clean, we recommend Zep Mold and Mildew Stain Remover. Using the power of bleach, this product eliminates dirt, stains, and grime on toilet bowls, sinks, tubs and more and can leave grout and other surfaces like new.

For best results, spray this product on the affected area, let it sit for a minute, wipe with a dry cloth or sponge, and rinse thoroughly.

Type: Spray | Size: 32 fluid ounces and one gallon | Surfaces: Clean acrylic, ceramic tile, porcelain, fiberglass, laminate, Corian surfaces

Mold and mildew in hard-to-clean places like grout, showerheads, around the washing machine, and the seal strip of a shower door can be easily tackled with a powerful gel concentrate. We recommend Skylarlife Mold and Mildew Stain Cleaner Remover Gel because of its easy-to-use applicator and fast-acting formula that works in seconds.

This product does not require wiping, scrubbing, or sanding—simply apply it to the affected surface and let it sit for up to eight hours and rinse or wash off with water.

Type: Gel | Size: 5 fluid ounces | Surfaces: Tile, grout, sealant, sinks

These Are the Cleaning Products Professional Cleaners Actually Prefer