Does VSync lock your FPS at 60? (2023)

Does VSync limit framerate?

Does Vsync lower FPS? Technically no, it caps it. The idea behind Vsync is that it caps your FPS to your monitor's refresh rate. It's done in order to minimize screen tearing, but Vsync isn't very good because it also gives you a relatively high amount of input lag.

@DeejeyCris Vertical sync will lock your framerates to the refresh rate of your monitor, so if your monitor is running at 60 Hz, you'll get a limit of 60 fps with v-sync enabled.

If you have a monitor that refreshes at 75Hz and a game that can play at 100FPS, then VSync synchronizes the frame rate of your game to match that with your monitor. The output of your game will be capped at 75FPS, which is the same as the refresh rate of your monitor.

So really, vsync is great but its very important to maintain your framerate at or above 60hz. You are right, anything above 60hz is fairly unnecessary and recent nvidia drivers have included a global framerate limit to stop your graphics card running away with itself.

With 144hz, vsync with triple buffering probably isn't going to produce anything noticeable unless you're trying to get good at CSGO or something. Do you suffer from screen tearing? If not, or you dont care, then you dont have to.

Should you turn VSync on or off? VSync is a great setting when it works as intended. Not only does it provide you with a better gaming experience by preventing screen tearing, but it also stops your GPU from overworking itself trying to render frames that are just tearing up your game.

If you experience FPS capped to 30/60 or if your framerate is unstable, it is most likely related to your VSync settings. Enabling VSync will force the game to run maximum at your monitors refresh rate (usually 60 Hz) and will in turn will eliminate tearing.

The answer is simple. If screen tearing interferes with your gaming experience and causes frequent screen tears, you should enable VSync. On the other hand, if you are facing input lag or a decreased frame rate, turning VSync OFF will be the correct alternative.

In short, No. A 60 Hz monitor basically refreshes the panel 60 times every second, which is basically 60 frames per second. So even if hardware capable of higher frame rates is plugged into a 60Hz monitor, the monitor output will be capped at 60FPS.

No, a 60Hz monitor can only display up to 60fps. Same goes for a 75Hz monitor displaying up to 75fps, or 144Hz displaying 144fps and so on. However you can still play a game with uncapped fps as this mitigates input latency (feels more reactive) even if your monitor does not display the particular fps.

Can 60Hz run 90fps?

60 Hz screen refreshes itself 60 times per second. You can run 90 fps on 60 Hz display, but the quality will be worse and you'll use more processing power.

When vsync is turned on, those tearing effects can be reduced and smooth gaming can be experienced. When you turn on vsync, you will get a lesser fps(than when it is turned off), but a better gaming experience. So turning on vsync will not affect you cpu and gpu heat.

Enabling VSync caps the fps at the monitor's maximum refresh rate and reduces the excessive strain on your GPU.

The only reason to have a cap at all is to prevent the game from glitching out at extremely high frame rates. Otherwise the more frames the better. You just need to keep your fps below 1000, so you can go closer than 800.

Pros of VSync

VSync is an excellent option for gamers who are dealing with mismatched frame rates and refresh rates. VSync forces your graphics processor unit and monitor to work in unison with fine-tuned cohesion. This synchronism effectively eliminates screen-tearing and promotes smoother, more fluid gameplay.

Fast Sync has much lower input lag than V-sync, making it the superior option for eSports games and first person shooters. Basically, Fast Sync instructs your system not to send each individual frame to the monitor if the monitor's refresh rate is lower than the GPU's frame output.

How Much FPS Can a 60 Hz Monitor Display? A 60 Hz monitor has the ability to display up to 60 frames-per-second. If you have a more powerful machine that can output more than 60 FPS, your 60Hz monitor will still display exactly the same 60FPS, but there will be screen tearing.

The reason why is because if you're able to get more frames in a given second then you'll be able to see an enemy coming around a corner faster than someone that is capped at 60 FPS which gives you a pretty good advantage.

However, Vertical Sync, better known as VSync, is a bit more complicated. By itself, VSync has no bearing on graphical quality, but enabling it eliminates ugly screen tearing. While that may seem like a no-brainer, it can also tank your frame rate and increase input lag—both of which are the bane of competitive gaming.

How much lag does VSync add?

Because of queuing, conventional vsync can add as much as 50ms of latency on top of your display's baseline input lag. This is where low-lag vsync comes into the picture.

It doesn't matter if you are using HDMI or Display Port or VGA or DVI or Thunderbolt…. your FPS will be the same no matter what cable you use.

No, the max FPS you can get on your 60HZ display is 60 fps, if it is showing 100 fps on the game also you are getting only 60 fps. While a 60 Hz monitor will only display 60 fps, if you run higher fps the game will render faster.

Yes you can. Step 1 - Right click on your desktop. Step 2 - Select Display setings from the drop-down menu. Step 3 - Select 'Advanced display settings'.

The visual cues in the world around us move at a particular rate, and our eyes can take in this information at a specific pace of perception. Most experts have a tough time agreeing on an exact number, but the conclusion is that most humans can see at a rate of 30 to 60 frames per second.

So, there's kind of no limit. Normally it's recommended for your FPS to be around double your monitor's refresh rate - e.g. for 75 Hz, you'd want to be getting around 150 FPS in your games. What is the best screen size for a gaming PC?

120 fps is 120 feet per second or 120 frames per second. 120 Hz is something happening 120 times per second. 120 Hz could be 120 fps.

A higher refresh rate means a smoother-looking screen that's easier on the eyes. So, if you're trying to ease your eyestrain, a refresh rate of 120 Hz is optimal. There's no need to pursue those high-end 144 Hz or 240 Hz monitors from Amazon or Best Buy.

What refresh rate should you be looking for in a potential upgrade? You can feel the difference between even 60Hz and 75Hz monitors, though you start to notice the benefits in-game around 120Hz. We consider the standard for gaming monitors is 144Hz, though 165Hz is common enough with overclocked panels.

Answer: For undemanding competitive games where you can easily reach around 144FPS, a 144Hz monitor is the way to go. If you care more about better graphics and visuals, and you mainly play new games, getting a 60Hz monitor with a better panel or a higher resolution may be a better route for you.

Does enabling VSync reduce FPS?

As graphics processors operate at their maximum speed, rendering outdated scenes may result in extremely high frame rates. Because it emits frames at such a high pace, this might cause your graphics processor to overheat. Enabling VSync limits the FPS to the monitor's refresh rate, reducing the graphics engine's load.

Smooth VSync reduces stuttering by locking into the most sustainable frame rate of your game and only increasing the fps if the game performance transitions sustainably above the monitor's rate.

Does it make a big difference? VSync only helps with screen tearing, and it only really does that by limiting fps when necessary. If your monitor can't keep up with the fps of a particular game, then VSync can make a big difference. However, VSync cannot improve your resolution, colors, or brightness levels like HDR.

When to turn VSync on. If your GPU is rendering more frames than your monitor is capable of displaying, it's smart to have VSync enabled. However, if your game's frame rate is lower than your monitor's maximum refresh rate, there is no particular need to have VSync on.

So it depends. If the game is not running at a frame rate higher than your monitor's refresh rate, then there is no need for Vsync. However for example, if your PC is running a game at 120fps on a 60hz display, then turn Vsync on or cap your in game frame rate. Otherwise you'll experience screen tearing.