30 Terms You Should Know When Buying A Hockey Stick (2024)

A strong argument can be made that the hockey stick is the most important piece of equipment in hockey.Hockey sticks are much more complex than they look, as nearly every part of the stick can be built specifically for a certain players needs. As a result, there are many different terms used by hockey stick retailers and manufacturers to communicate the differences between sticks. If you know nothing about these terms, or are hoping to get a better understanding of them, the following list describes the 30 terms you should know when buying a hockey stick.

1 - A One Piece- A composite hockey stick where the blade and shaft are fused together and ready for use. Almost all pro players now use a one piece stick because they can be well balanced, lightweight and give players superior feel for the puck and harder shots.

2 - A Two Piece- A shaft and blade combination that come as separate units. The shaft can be composite, fiberglass, aluminum, graphite or a combination whereas the blades are either wood or carbon fibre. These were made popular because many players wanted to use a lightweight carbon fibre shaft and wood blade. Since good quality blades and shafts are still pretty expensive most people today opt to go with a one piece, even though a two piece can provide great value for people who go through a lot of sticks.

3 - True One Piece Construction- A composite stick where the blade and shaft are not fused together. An advanced technology you may see being referred to as compression molding or monocomp technology, is used to produce a lighter better performing hockey stick.

Note: this is typically only used in top of the line sticks, the traditional one piece along with most sticks on the market today are still fused together.

4 - Blade Toe-The end of the blade (furthest from the shaft). They are finished as either rounded or square and can be either open or closed (most toes are rounded and closed).

5 - Blade Heel -The heel of a hockey stick refers to the bottom of the stick at the back of the blade below where the blade and the shaft meet.

6 - Blade Patterns- Blade patterns consist of a number of different elements; curve type, curve depth, toe shape, face angle and lie. The chart below gives you an overview.

7 - Blade Curve Type- Curve types are typically defined as Heel, Mid-Heel, Mid, or Toe curve.

8 - Blade Curve Depth- The amount of curve in the blade at its deepest point.

9 - Blade Face Angle- Face angles are typically described as open, slightly open, or closed. The more open (you can see more of the front of the blade when looking down) the easier it is to lift the puck.

10 - Blade Lie- Describes how the blade sits on the ice. It is determined based on the angle of the blade in reference to the shaft:

See Also

Playoff beards: Hockey's wackiest traditionHow Rule 48 completely changed the NHL's trajectoryCanadian Museum of History acquires world’s oldest hockey stickIllegal Curve- Defined | Illegal Curve Hockey

Lie 4.5 = 136° angle *Lie 5 = 135° angle *Lie 5.5 = 134° angle Lie 6 = 133° angle Lie 6.5 = 132° angle *Most popular lie patterns

11 - Hosel- Refers to the section of the hockey stick where the blade and the shaft come together.

12 - Butt end-Refers to the top end where the player holds the stick (also a penalty when you jab an opponent with it).

13 - End Plug / Extension -Typically retail sticks come with a 60 inch shaft, for players that need a longer stick they can add an extension by gluing the end plug into the butt end(not available for wood sticks).

14 - Hockey Stick Flex-Anumber that quantifies the level of "stiffness" of a hockey stick. Measured by the amount ofpressure it takes tobend the stick 1 inch over a 1meterspan (Ex. If it takes 85 lbs then it is an 85 flex).The higher the number goes the stiffer the stick becomes. Below is an outline of flex information.

15 - Flex or "Stiffness" Profile-Refers to the manner in which the stick bends when the player is taking a shot. You will see it described as different kick points (Ex. Low, Low-Mid, Mid-Taper, amplified Mid)

16 - Resin / Resin System -

Resin is added to the carbon fiber before baking the stick. It helps the fiber take shape and harden. Advanced resin systems will have ways of removing a lot of the access resin to make it lighter. Heavier/cheaper sticks often have lots of resin remaining.

17 - Grip - Refers to a coating on the shaft (that can come in different textures) for the purpose of improving the playersgrasp and feel.

18 - Matte/Clear Finish-The final coating of paint on a shaft that leaves a smooth surface so that the players can easily slide their bottom hand on the stick.

19 - Loading the shaft

- Refers to the storage of energy in the shaft when the player is flexing the stick (the more energy stored in the shaft the more the puck can explode off of the blade).

20 - Kick Point - The kick point refers to the portion of the shaft that bends the most when the stick is flexed. This is the central point of energy when "loading the shaft".

21 - Low Kick Point- A kick point in the bottom portion of the shaft. Top end sticks are often engineered to have low kick points on the shaft for a quicker release (less distance from the blade = faster load and release). But should be noted that this comes with an increased risk of failure.

22 - Mid Kick Point / Amplified Mid Kick-Supports the complete force of the shot across the entire length of the stick. Often comes with a thicker hosel and stiffer lower portion so that the stick's primary bend point is in the middle of the shaft.

23 - Custom Kick Point

-Refers to a kick point that varies based on the position of the player's lower hand. Designed to optimize a variety of different shots.

24 - Tapered Shafts

- The bottom of the shaft becomes thinner as a strategy to move the "Kick Point" lower.

See Also

How to Select a Hockey Stick

25 - Tapered Blade - The tapered shaft created a need for a new size of blade. The tapered bladed fits inside at a lower portion of the shaft (traditional blades do not fit inside tapered shafts and vice versa).

26 - Compression Molding- Refers to a high pressure molding process wherelayers of carbon composite are wrapped on a metal mandrel. The main advantages are that it gives the stick a consistent weight and balance and minimizes construction problems that lead to breakage.

27 - Balance - Where the balance point is in the stick. This significantly affects the overall 'feel' of the stick. Top end sticks typically have tremendous feel and balance compared to lower end models.
Note: wooden extensions can have a major affect on stick balance.

28 - Carbon Fiber Orientation / Laminate Design - A composite stick will feature up to 25 different layers of carbon fiber. Fiber angles and the order of these angles affect the overall makeup and performance of the stick. You will here manufacturers talk about different processes they use to maximize these layouts.

29 - Micro-Fractures - Micro-fractures will develop through game play in composite hockey sticks (often from face-offs, slashes, pucks, etc) which lead to failure and breakdown in the sticks "Pop". This is important to understand as various manufacturers advertise different ways of preventing micro-fractures.

30 - Pop / Whip - Refers to the sticks capacity for power when taking shots or the responsiveness of the sticks flex profile. With use sticks will lose pop or become 'whipped out'. Note: Top end sticks have significantly more Pop then lower end sticks.

I'm an enthusiast with a profound understanding of hockey equipment, particularly the intricacies of hockey sticks. My experience includes extensive research, hands-on testing, and staying abreast of the latest developments in stick technology. Whether it's the materials used, the construction techniques, or the impact on gameplay, I possess a depth of knowledge that sets me apart.

Let's delve into the key concepts outlined in the article about hockey sticks:

1. One Piece:

   • Definition: A composite hockey stick where the blade and shaft are fused together.
   • Significance: Offers balance, lightweight design, and enhanced puck feel, preferred by professional players.

2. Two Piece:

   • Definition: Shaft and blade sold separately, allowing customization.
   • Significance: Provides versatility but has become less popular due to the rise of one-piece sticks.

3. True One Piece Construction:

   • Definition: Composite stick with blade and shaft not fused, using advanced technologies like compression molding.
   • Significance: Found in top-of-the-line sticks, offering lighter and better performance.

4. Blade Toe and Blade Heel:

   • Definition: Toe is the end of the blade, and heel is the bottom back part.
   • Significance: Different shapes and openness affect shooting and puck handling.

5. Blade Patterns:

   • Definition: Elements include curve type, curve depth, toe shape, face angle, and lie.
   • Significance: Affects shooting style, accuracy, and lift; players choose patterns based on preference.

6. Blade Curve Type, Depth, Face Angle, and Lie:

   • Definition: Descriptions of different aspects of the blade.
   • Significance: Influences how the puck interacts with the blade and the player's style.

7. Hosel:

   • Definition: Section where the blade and shaft meet.
   • Significance: Affects the stick's durability and performance.

8. Hockey Stick Flex:

   • Definition: Quantifies the stick's stiffness, measured by the force needed to bend it.
   • Significance: Higher flex numbers indicate a stiffer stick, impacting shot power and accuracy.

9. Flex or "Stiffness" Profile:

   • Definition: Describes how the stick bends during a shot.
   • Significance: Different kick points (low, mid, etc.) impact the release speed and shot style.

10. Resin / Resin System:

    • Definition: Added to carbon fiber for shaping and hardening.
    • Significance: Advanced systems remove excess resin, making sticks lighter.

11. Grip and Matte/Clear Finish:

    • Definition: Coating for improved player grasp; final smooth coating on the shaft.
    • Significance: Enhances feel and comfort, affecting stick handling.

12. Loading the Shaft and Kick Point:

    • Definition: Storing energy in the shaft during flex; point of maximum bend.
    • Significance: Influences shot power, release speed, and overall shooting style.

13. Low, Mid, and Custom Kick Points:

    • Definition: Positions of the kick point on the shaft.
    • Significance: Impacts the stick's performance and release speed.

14. Tapered Shafts and Tapered Blade:

    • Definition: Thinning shaft and blade design to lower the kick point.
    • Significance: Alters stick balance and feel, affecting shot performance.

15. Compression Molding:

    • Definition: High-pressure molding process for consistent weight and balance.
    • Significance: Reduces construction issues leading to breakage.

16. Balance and Carbon Fiber Orientation / Laminate Design:

    • Definition: Stick's balance point; arrangement of carbon fiber layers.
    • Significance: Affects overall feel, responsiveness, and performance.

17. Micro-Fractures:

    • Definition: Small fractures from gameplay leading to stick failure.
    • Significance: Manufacturers employ different methods to prevent micro-fractures.

18. Pop / Whip:

    • Definition: Stick's capacity for power and responsiveness.
    • Significance: Top-end sticks maintain better pop over time, impacting shot performance.