Adjusting trucks on your new skateboard - School of Skate?

Tighter trucks reduce the shakiness and instability of a board, which is ideal for new riders because it makes the board easier to stand and balance on. However, tightening your trucks is optional and many riders prefer looser trucks since they allow you to maintain a cleaner style.

Should I tighten new trucks?

Tighter trucks reduce the shakiness and instability of a board, which is ideal for new riders because it makes the board easier to stand and balance on. However, tightening your trucks is optional and many riders prefer looser trucks since they allow you to maintain a cleaner style.

How do you break in new skate trucks?

Wheels and Bearings: Roll it out: Push and cruise around on flat surfaces to break in the wheels. This helps reduce the initial "sticky" feeling. Spin it: Take off the wheels and spin the bearings. If they're noisy or slow, clean and lubricate them with skate lube. Oct 23, 2022

What is the correct position for trucks on a skateboard?

This is a good question and there is a simple answer, the basic rule to always remember is 'Kingpin in'. When looking down at your board, both truck kingpins should be facing each other, and your truck hangers will be facing outwards on the nose and tail . This is the only way your trucks will work and turn together.

Is it better to have loose or tight trucks?

Tight trucks are the best option for downhill longboarding because they give you more control and stability when shifting weight and avoiding things on the road. When tightening your trucks, ensure they have just enough room to move a little. Too much pressure and the wrong trick could split your board in half.

Should trucks be loose or tight for beginners?

Firstly, there's no right or wrong way to ride your trucks (except backwards!). Whatever feels good for you, just do it. In saying that, steer away from having them too tight as this can often put a lot of pressure on the bushings (those little rubber bits in the middle) which causes them to crack.

Why is my board creaking?

The noise you're hearing is the pivot cup . To get rid of that pesky sound, try this: First, take the hanger off of the baseplate. Then, take some soap shavings or wax and spread it around the cup. Finally, put it all back together.

How do you orient trucks on a skateboard?

Place your truck on the bottom of the board with the kingpin facing inwards . If attaching reverse kingpin trucks, ensure that the kingpin nut is facing outwards towards the nose or tail. Line up the holes in the baseplate of the truck with the holes in the skateboard deck.

What is it called when you hold a skateboard by the trucks?

The mall grab is often a dead giveaway that you're dealing with a poser skateboarder. Grabbing a board by the trucks is generally frowned upon because to carry a skateboard around as a fashion statement grinds some skateboarder's gear.

Adjusting trucks on your new skateboard

If you’ve read our post on buying a beginner skateboard, you may be the proud owner of a new skateboard (hopefully you’ve got it from your local skate shop). You’ve used our skateboard sizing tool to make sure it’s the right size for you before you bought it. So what next?

Even if you’ve chosen the right size board, the trucks are not necessarily set up for you out of the box. Everyone is different weights and different shoe sizes, and even your desired riding style may affect how you adjust your trucks. The bushings (the rubber discs in the trucks) may also be softer in some setups than others.

Are my trucks too loose?

If the trucks on your skateboard are too loose, you will wobble when you pick up moderate speed. You might get wheel bite (which is when the wheel rubs against the board). You should tighten your trucks. Be wary of going down any hills if you feel you might be in this camp. Many an aspiring skateboarder has taken a slam going down a hill with loose trucks, and haven’t felt confident enough to get back on board again.

Are my trucks too tight?

If your trucks are too tight you won’t be able to turn in a tight circle. Why would you need loose trucks? Well, looser trucks are more forgiving. When you are losing your balance, loose trucks will permit a tighter turning circle, meaning it’s more likely you can steer the board back under your centre of gravity. Tight trucks will make it harder to steer the board back underneath you, and you’ll need to step off to avoid falling to the ground. You need to loosen your trucks.

Test and adjust your trucks

Try setting up a slalom course, and try and carve around the cones.Start with wide gaps between the cones and gradually move the cones closer together to improve your carving.

How to adjust the trucks

To adjust skateboard trucks, get a skate tool, or a spanner, and adjust the kingpin. The kingpin is the largest nut on the truck. Turn clockwise to tighten, and anti-clockwise to loosen. Adjust your trucks about a quarter turn each time. Then try your slalom again. Ensure you have a few goes before making further adjustments so you can get past the initial disruption of the change. If you’re not happy, make another quarter turn adjustment until you feel it is right for you.

What if the trucks are still too stiff/loose after adjusting?

It could be you have cheap components in your skateboard. You could try replacing the bushings for a harder or softer set. In cheaper completes sometimes they scrimp on the bushings, and manufacture the bushings from plastic, rather than rubber. Change them out, it’s quite easy to do, and then try carving around a slalom course again.

If bushings don’t fix your trucks then there is the possibility that your trucks are just not good enough. We always say spend at least £40 on a skateboard so you don’t end up with rubbish.

Truck adjustment depends on riding style

How you adjust your trucks also depends on what you want to ride. Tighter trucks provide stability. If you want to go fast, then tighter trucks are better. Looser trucks allow you to change direction quicker and are more forgiving.

Ride tighter trucks for:

bombing hills
riding big bowls or ramps

Ride loose trucks for learning:

flips
grinding ledges
smaller ramps & bowls with tight transitions

as you get more proficient at these skills and want to go faster you will want to tighten your trucks

Learn to skateboard

We have a lot of lessons online for beginners. Go forth and shred…

Adjusting trucks on your new skateboard - School of Skate (2024)