Plastic is proving to be a versatile material for the future in spite of the hue and cry against it. It is opening up a world of innovations where smaller, lighter and cheaper is driving the markets. But it comes with its own technological challenges such as suitable fastening solutions. The regular screws are completely unsuitable leading to development of specialised screws for use in plastics.
Fastening plastics using standard self-tapping screws frequently causes assembly problems. The plastic material is liable to burst due to stresses that build up in the assembly.
One solution is inserting the screws into metal inserts but this adds to the procurement and assembly costs.
Fastening thermo plastic materials during construction and assembly as well as their load capacities prove to be challenging issues for industrial users on a regular basis.
With the increasing use of 3D printing technology, it has become imperative that a reliable screw capable of providing a secure strong joint in plastics is available.
Selecting the Right Fastener
With thousands of different polymers available today, there can be no absolute guidelines to follow when fastening these materials.
The dynamics of plastic vary according to the type of plastic used. The screw selected needs to take into account the thermal expansion, clamp retention and tractile capability of the material Laboratory testing of fasteners in the subject material is the only way to determine if acceptable performance levels can be achieved.
For maximum performance, a fastener should be selected early in the design process. This would have many potential benefits.
Reduced In-Place Costs
Proper fastener selection may allow the use of thinner bosses and eliminate the need for supplementary locking devices. This can reduce in-place costs through:
- Reduced material usage
- Reduced cycling times
- Elimination of inserts and adhesives
- Streamlined assembly.
Optimal Performance
Fasteners specially designed for plastics can optimize performance in specific types of materials. By selecting the proper fastener, you may obtain:
- Higher strip-out torque values
- Increased resistance to loosening
- Higher pull-out values
Thread Forming Screws
Screws that deform the base material to form their own threads are called thread forming screws or Trilobular. The thread-forming screws deform a lot of plastic when they are driven. This produces a high resistance to back-out but also creates large concentration of stresses in the material. For harder plastics, this can result in failure.
An effective solution is to use thread-forming screws with 30° thread form.
This feature allows the screw to make deeper grooves into the material and capture more of it between the threads, creating an even greater resistance to shear force while reducing stress.
The JCPlas screwuses this design form which provides many benefits like:
- Optimal connection of plastic parts
- Minimal radial stress
- Considerably increased durability of screw connection in static and dynamic tensile loading.
- Low thread forming torque ensuring safety of the plastic recipient
- Elimination of the risk of relaxation
- A guaranteed tenfold re-assembly
- The thread’s one-of-a-kind geometry results in an optimal fastening and self-locking mechanism for thermoplastics.
- Increases preload force by higher flank overlapping on pressure side
- These Screws with large than normal threads increase the load bearing capacity of the plastic and provide high quality internal threads with no damage to the molecular structure of the plastic, significantly reducing the danger of material failure.
- Fast, cost-effective application.
- The easy starting, easy driving capabilities of JCPLAS screws cut assembly time and costs.
- Exceptional holding power eliminates the need for thread inserts.
For more information
Download the Plastite-Screw-Guide
View our range of Thread Forming Screws for use in Plastics.
Click to rate this post!
[Total: 4 Average: 3.8]
